- 11 (1/4" x 1-1/4") Phillips head concrete anchors
3/16" masonry drill bit3/16" masonry drill bit3/16 masonary drill bit
- 1 phillips drill bit
Needed to Install Kit
- Butyl Rope
- Adapter Ring (Tuf-Tite Or Polylok)
- Power Drill
Trying to install a riser system on your septic tank? Read the guide to find out how
Tuf-Tite makes a full line of Risers and accessories for Pre-Cast applications. Click the blue links to view the product page.
Concrete Lid - with handle. Use the Safety Pan to cast your own concrete lids.
Safety Lid - May be used in place of concrete lid. Fits 16", 20" & 24" Riser Pans. Green only.
Safety Pan - Safety PanTM available for 16", 20", and 24" Risers. Green only.
6" Tall Riser - For septic tanks. Stackable in 6" increments. Available in 12", 16", 20" and 24" diameters. Green only.
12" Tall Riser - For septic tanks. Stackable in 12" increments. Available in 12", 16", 20" and 24" diameters. Green only.
Tank Adapter Ring (TAR) - For mounting riser or lid to tank when casting-in is not an option.
Tuf-Tite Riser Accessories (Not Shown In Picture) - Don't forget any required accessories when installing a riser system.
- SS Screws - Our risers do not included the Stainless Steel screws. You must order them separately
- Butyl Rope - You will need to put a ring of butyl rope in between your risers and under the Tank Adapter Ring to ensure a water tight seal.
- Tar Screw Kit - Use this kit to mount the Tank Adapter Ring to the top of your tank.
- Additional Information
Manufacturer Tuff Tite
Number of reviews : 36Average rating : 4 /5M. Richardthe 13/02/20175/ 5Easy to install, high quality.C. Jamesthe 11/02/20175/ 5great productB. Williamthe 28/01/20175/ 5Had no problem with drill bit, I think other reviews I read on this was by people who didn't know how to let the drill do the work. I returned a extra drill bit a bought from Home Depot because I didn't need it . And I didn't break any screws because I made sure I drilled the holes deep enough to take full length of the screw.D. Georgethe 17/01/20173/ 5The concrete drill bits furnished were of poor quality. I used both bits and did not complete attaching even one of the adaptor rings. Fortunately I had a set of good concrete drill bits.R. Fredthe 15/11/20165/ 5I thought these would be hard to screw in being phillips head but they sent a special large size bit that worked well.
You may also be interested in the following product(s)