Welcome to TG WasteWater
Tuff Tite Lids - Septic Tank Covers
Note: This product does requires screws to attach the products together. You will need to purchase stainless steel screws to attach them. You can purchase them HERE. You should use stainless steel screws because normal screws will corrode from the moisture of your septic system.
To help you order the right amount of screws refer to the following list
12” Risers & Lids = 3 Screws
16” Risers & Lids = 4 Screws
20” Risers & Lids = 8 Screws
24” Risers & Lids = 6 Screws
If you order multiple items add the screw amounts together. For example if you order 2 24” Risers and 1 24” Lid you will need 18 screws. (6X3=18)
Tuf-Tite makes a full line of Risers and accessories for Pre-Cast applications. Click the blue links to view the product page.
Concrete Lid - with handle. Use the Safety Pan to cast your own concrete lids.
Safety Lid - May be used in place of concrete lid. Fits 16", 20" & 24" Riser Pans. Green only.
Safety Pan - Safety PanTM available for 16", 20", and 24" Risers. Green only.
6" Tall Riser - For septic tanks. Stackable in 6" increments. Available in 12", 16", 20" and 24" diameters. Green only.
12" Tall Riser - For septic tanks. Stackable in 12" increments. Available in 12", 16", 20" and 24" diameters. Green only.
Tank Adapter Ring (TAR) - For mounting riser or lid to tank when casting-in is not an option.
Tuf-Tite Riser Accessories (Not Shown In Picture) - Don't forget any required accessories when installing a riser system.