Home /
Tuf-Tite Universal Heavy Duty Flat Lid

Tuf-Tite Universal Heavy Duty Flat Lid

More Views

Tuf-Tite Universal Heavy Duty Flat Lid

or less $62.99

110 Reviews

Availability: In stock

Flat Riser Lids - Available in 20" and 24" diameters.

Click the link below to view the dimensions of the Tuf-Tite Flat Lids

20in Flat Lid Dimensions - 24in Flat Lid Dimensions

*Manufacturer
*Lid Size

* Required Fields

or less $62.99

Qty:

Description

Details

Fits most commercially available:
- Risers
- IPEX-PVC Ribbed Pipe
- Corrugated Pipe

Note: This product does requires screws to attach the products together. You will need to purchase stainless steel screws to attach them. You can purchase them HERE. You should use stainless steel screws because normal screws will corrode from the moisture of your septic system.

To help you order the right amount of screws refer to the following list

12” Risers & Lids = 3 Screws

16” Risers & Lids = 4 Screws

20” Risers & Lids = 8 Screws

24” Risers & Lids = 6 Screws

If you order multiple items add the screw amounts together. For example if you order 2 24” Risers and 1 24” Lid you will need 18 screws. (6X3=18)

Tuf-Tite makes a full line of Risers and accessories for Pre-Cast applications. Click the blue links to view the product page.

Riser Lids - Rounded Lids or Flat Lids with Molded-in gasket. Available in 12", 16", 20" and 24" diameters. Green only.

Concrete Lid - with handle. Use the Safety Pan to cast your own concrete lids.

Safety Lid - May be used in place of concrete lid. Fits 16", 20" & 24" Riser Pans. Green only.

Safety Pan - Safety PanTM available for 16", 20", and 24" Risers. Green only.

6" Tall Riser - For septic tanks. Stackable in 6" increments. Available in 12", 16", 20" and 24" diameters. Green only.

12" Tall Riser - For septic tanks. Stackable in 12" increments. Available in 12", 16", 20" and 24" diameters. Green only.

Tank Adapter Ring (TAR) - For mounting riser or lid to tank when casting-in is not an option.

Tuf-Tite Riser Accessories (Not Shown In Picture) - Don't forget any required accessories when installing a riser system.

SS Screws - Our risers do not included the Stainless Steel screws. You must order them separately
Butyl Rope - You will need to put a ring of butyl rope in between your risers and under the Tank Adapter Ring to ensure a water tight seal.
Tar Screw Kit - Use this kit to mount the Tank Adapter Ring to the top of your tank.

Reviews

Product Reviews

Number of reviews : 110

Average rating : 4.8 /5

View the trust certificate

A. Anonymous

the 28/07/2018

5/ 5

I had to replace an old, thick, concrete cover on a septic riser. The Tuf-Tite 20" Universal HD ILid was perfect for the job as I was able to fasten thru the lid and into the concrete riser with SS Screws.

A. Anonymous

the 13/07/2018

5/ 5

Went in well, time will tell,how it holds up

A. Anonymous

the 28/06/2018

5/ 5

Good quality. Very rigid and heavily reinforced with ribs.

A. Anonymous

the 23/06/2018

4/ 5

I replaced two saggy lids with these heavy duty 24" lids and I think the lids will hold up well. However, the sales sheet said stainless steel screws were included. I received no screws. Installation notes for others: Unlike many standard flat lids, this lid extends over 2" down into the riser. This is good because the lid fits snugly and can't slide off, even unfastened. On the other hand, in my pump tank, I had to trim the top of the float tree and the tube that contains the UV light, so they didn't interfere with the lid..

A. Anonymous

the 17/06/2018

5/ 5

Just as described. Very good.